The Krug Check Rail System is designed to protect asphalt, concrete, and paved surfaces in areas such as industrial yards, assembly halls, and level crossings. Precision machining of the rail profile and the use of specially developed fastening components allow it to be combined with most Vignole rail profiles.
Machining Services
- Cutting to custom lengths
- Drilling fastening holes
- Groove width reduction through precision machining of the profile flanks
- Fabrication of flared rail ends using welded flat steel wedges
Recommended fastening spacing: 1000 mm
Fastening Kits for Check Rails (Optional)
- M22 × 90 mm check rail bolt with nut and lock washer
- M22 × 100 mm check rail bolt with nut, lock washer, and spacer
- M22 × 110 mm check rail bolt with nut, lock washer, and backing plate
- Custom fastening kits available on request, including solutions for double-sided installation
Technical Specifications
| Rail Profile | Groove Width | Maximum Rail Length | Weight/m (kg) |
|---|---|---|---|
| 41 E1 | 53,7 mm | 15 m | 22,30 |
| 49 E1 / E5 | 56,0 mm | 15 m | 22,30 |
| 54 E3 / E4 | 56,5 mm | 15 m | 22,30 |
| 54 E1 | 56,0 mm | 15 m | 21,50 |
| 60 E1 / E2 | 56,0 mm | 15 m | 22,30 |
| R 65 | 56,0 mm | 15 m | 21,70 |
| Special Check Rail Profiles | Groove Width | Maximum Rail Length | Weight/m (kg) |
|---|---|---|---|
| 49 E1 / E5 | 45,0 mm | 15 m | 21,90 |
| NP 46 / 46 E3 | 53,0 mm | 15 m | 21,60 |